BenQ Mobiuz EX3210R - Technoz Daily

Post Top Ad

Responsive Ads Here

Two-minute review

We’ve seen a few BenQ Mobiuz monitors now and while they’ve generally impressed us, they've also often fallen short in a few areas. This EX3210R offers a curved, 32-inch screen with a UHD, 2,560 x 1,440 resolution, a 165Hz refresh rate and offers supporting specs that mean it shouldn’t have any real weak points. Consider our interest piqued.

The EX3210R also sports Mobiuz’s familiar, funky, orange design flourishes on the stand and the large brownish speaker grille on the front. The latter isn’t decorative either; it masks two 2-watt speakers and a 5-watt sub. These can deliver some punchy bass and get reasonably loud without distorting or losing fidelity at the top, bottom or middle ranges. Impressive! 

At the rear there are four thin RGB strips, which can display a single colour or pulse in a variety of patterns. As if that’s not enough, the solid stand allows 10cm height movement plus 15˚ pivoting in each direction and -5˚ to +15˚ tilt, so there’s plenty of adjustability. 

Other key features include a two-port USB hub which can be used as a KVM switch. This is particularly useful when working from home and you need to swap between, say, a work laptop and your home PC – you just move a single USB cable and your peripherals all work. On top of this, a small infrared remote is also included and offers rapid, responsive access to all the monitor’s settings – and we relied on it regularly.

BenQ Mobiuz EX3210R monitor remote control

(Image credit: Future)

The screen itself is sharp and well lit. It gets nice and bright thanks to its 400-nit peak brightness and the slight (1000R rated) curve helps stave off eye strain because your eyeballs don’t need to refocus much when scanning across the large display. Eye care is also aided by an impressive matte anti-glare coating, which also banishes reflections. There are also Low Blue Light and Flicker Free features to help matters.

The BenQ Mobiuz EX3210R’s 165Hz refresh rate and 1ms (MRPT) response time ensure that fast-moving objects are rendered buttery smooth whether you’re in a fast-and-frantic firefight or speeding round a virtual racetrack. There’s minimal motion blur or ghosting. 

All the while, colours can be vibrant depending on your colour settings (you can optionally use the ‘Black eQualizer’ feature to brighten dark areas to reveal hidden enemies... and butcher colour accuracy as a result). It also supports 90% of the demanding DCI-P3 colour gamut. Colour transitions are impressively smooth. 

BenQ raves about its HDRi technology which supposedly simulates HDR, but in our experience all it seems to do is annihilate whatever you’re watching by blowing out highlights and/or plunging shadows into darkness. Fortunately, it’s simple to turn off. However, what you’re left with is a display with only mediocre contrast: dark scenes can be washed out while details get lost in bright areas.

Another minor potential gripe was that we constantly switched between preset colour and performance modes to suit what we were watching – there wasn’t a one-size-fits-all mode, but you can make good use of custom settings to help alleviate this.

Price and release date

The BenQ Mobiuz EX3210R is available now in most major markets and costs $549 / £480 / AU$799. It belongs to a market segment where similar big-brand rivals can cost between one-third less and two-thirds more. Alternatively, you can find budget-brand models for less-than half price. 

All the monitors in this space offer different specialities. Some save money on build quality, design, features and materials while others offer different technologies that cater to professional-level gamers, offer enhanced connectivity or are capable of superlative contrast. On this spectrum, the BenQ Mobiuz EX3210R sits impressively in the middle. 

Design

We like an easy-to-build monitor and the BenQ Mobiuz EX3210R delivers: the base has one, finger-friendly screw that connects it to the stem and the panel snaps onto the other end with a quick-release catch. Too easy. The tripod stand with its two, long, V-shaped front feet is very solid and looks funky with its orange-flourished inside legs (with black pin stripes). 

There’s a generous degree of ergonomic manoeuvrability thanks to 100mm height adjustment. 15˚ pivoting in either direction and -5˚ to +15˚ tilt.

BenQ Mobiuz EX3210R monitor side/rear view

(Image credit: Future)

The rear is a stylish silver with some geometric detailing. It also has four LED strips which can be set to nine different colours and pulse in a variety of patterns.

At the front there’s an IR receiver for the small black remote. We were very impressed with how responsive this was and never bothered using the built-in mini joystick at the base of the monitor. Both methods of navigation allow rapid and intuitive access to quick-menu OSD settings, or the more-detailed lists. 

(It’s worth noting that there’s also a Dying Light 2-styled version of the EX3210R for fans of the game.)

Features

The headline specs paint a good picture of the features on offer and include the 165Hz refresh rate, a 1000R-rated curve, the 2.1 speakers and a two-port, USB-A 3.0 hub which can act as a KVM switch. The latter allows you to swap a single USB-A cable between computers and use the same keyboard and mouse – ideal when bringing a work laptop home. 

While the BenQ Mobiuz EX3210R’s curved screen will inherently reduce the eye-fatigue caused by your eyeballs constantly refocusing when scanning across the display, there’s also blue light adjustment to further improve matters. Plus, there’s an impressive anti-glare coating on the matte screen, which does what it’s supposed to in addition to banishing reflections. 

In terms of gaming features, there are no on-screen crosshairs but there is a 'Black eQualizer' setting, which butchers contrast but helps reduce the depth of dark and bright areas to stop enemies jumping out of shadows or the sun. This too, works well. 

The Blur Reduction feature can sharpen-up moving images, but we found it came at the expense of noticeable ghosting with very visible double edges preceding objects.

The feature that BenQ shouts about the most on the Mobiuz EX3210R is HDRi. This aims to boost the screen’s modest 2,500:1 contrast into HDR territory through intelligent simulation. It’s easily accessed via a button in the right-hand lower corner or alternatively via another on the remote. 

BenQ Mobiuz EX3210R monitor HDRi button

(Image credit: Future)

We tried it with multiple media types with Windows HDR turned on and off. There are four settings: Game, Cinema, Display and off. We by far preferred the latter. While there are some scenes in a game or movie that might occasionally look a little better, for the most part the result is dreadful – plunging dark areas into blackness and bright areas into a white out. More on this below.

Connectivity

All ports are down-facing and set in the middle at the rear. There are two downstream USB-A 3.0 ports, USB-B for upstream connectivity, two HDMI 2.0 ports and a DisplayPort 1.4. There’s also a 3.5mm audio jack.

HDMI and DisplayPort cables are included. 

BenQ Mobiuz EX3210R monitor rear ports

(Image credit: Future)

Performance

The BenQ Mobiuz EX3210R’s IPS panel is generally bright and evenly lit. The UHD 2,560 x 1,440 resolution makes the Windows Desktop look very crisp and clear on the 32-inch screen. Colours can appear as muted or as overly-vibrant as you desire, depending on your settings. There’s minimal banding in both colour and monochromatic colour gradients, although blocky artefacts can appear in dark areas of videos on occasion. 

However, while we had few issues with watching movies (as colours were vibrant and motion was smooth) after living with the near-infinite contrast of OLED, we did notice that there is a fair amount of backlight leakage from the sides, top and bottom. This mainly manifests as less-than-true-black letterbox bars in movies. However, only cinema purists would likely be annoyed.

More of an issue is contrast performance, which is rated as 2,500:1. While the screen can get nice and bright, detail can blow-out in bright areas, and dark scenes tend to get washed out with excess brightness. Again, this isn’t an OLED screen, but the traditional contrast limitations associated with IPS panels are manifested here. This is where BenQ’s HDRi simulated-HDR settings come in. 

BenQ Mobiuz EX3210R monitor HDRi feature comparison

The right side illustrates HDRi turned off: you can see everything in the dark room but it all looks washed out. On the left is HDRi turned on: it’s more dramatic but most details have become invisible and that’s not practical for gaming. (Image credit: Future)

If a dark scene looks too bright, turn on the simulated HDR and suddenly it’s properly dark. However, you’ll lose so much detail elsewhere in the picture that any contrast concerns suddenly fall by the wayside. In bright scenes it tends to increase whiteouts, with even more detail in bright areas getting lost. In scenes made up of particularly bright and dark areas, you mainly lose detail in both at the same time. Consequently, we left it turned off.

We are being a bit nitpicky here. This is a gaming monitor after all, and while it’s nice to have amazing contrast in Cinematic games like Far Cry, anything competitive requires you to see as much as possible and for it to be rendered smoothly even when in fast motion. And the BenQ EX3210R succeeds here. 

The BenQ Mobiuz EX3210R’s UHD resolution adds good detail, while the 165Hz refresh rate keeps everything buttery smooth. The 1ms MPRT helps reduce ghosting but it’s not totally absent. The panel also supports AMD FreeSync Premium Pro which can prevent image tearing and boost performance in compatible games.

It's also worth noting the performance of the speakers. There are two 2-watt units and a 5-watt sub – that’s a lot for a monitor and they deliver impressive sound. There’s punchy bass and decent volume. Several audio presets enable you to tinker with it further, but generally we were pleased with fidelity from top to bottom.

Ultimately, there are far worse gaming monitors out there, and those that offer better contrast (and proper HDR) tend to be considerably more expensive while being deficient in other areas.

Should I buy the BenQ EX3210R

We’ve used gaming monitors with superior displays and we’ve used many that are much worse. While we’d like to see better contrast performance, it really doesn’t feel like a big miss during general use. This monitor is very good at everything from work to play, and there are few better all-rounders on the market. 

Buy it if...

You want a monitor that does everything

Monitors often compromise in at least one area, but the BenQ EX3210R is well-built, well-designed, well-featured, sounds great and performs well.

You want a monitor that’s highly configurable

The excellent remote and responsive OSD mean it’s easy to tinker with colour performance to get things just so for different occasions, including competitive gaming, work and movie watching.

You want a big gaming monitor that doesn’t break the bank

Ultimate gaming performance can cost the earth, but the all-round performance of BenQ EX3210R makes it great value.

Don't buy it if...

You don’t have much cash

If your overriding requirements involve having a curved 32-inch 4K monitor with a 165Hz refresh rate, you can save considerable money by choosing a cheap rival that skimps on speakers, connectivity features, design elements and build quality.

You really care about contrast

Casual users won’t bat an eyelid, but if HDR is life then this isn’t the monitor for you.

You want USB-C

It has many bells and whistles but USB-C isn’t one of them.



from TechRadar - All the latest technology news https://ift.tt/wibL2BQ

No comments:

Post a Comment

Post Bottom Ad

Responsive Ads Here

Pages